HP Sprocket

Posted by Tuvlev on

I have a HP sprocket plus that only print blank pages. The printer feed a page through the printer, but the page comes out blank (white). Any tips on how to solve this, or if it is solvable 


Older Post Newer Post

1 comment

  • @Tuvlev
     
    Welcome to the HP support community.
     
    Upgrade the Sprocket firmware

    Make sure the Sprocket is on and your mobile device is connected to the Internet.

    On your mobile device, open the HP sprocket app.

    Tap the Menu icon , and then tap sprocket.

    Tap Manage Printers, make sure your Sprocket is selected, and then tap Printer Settings.

    Under the Status section, locate Battery.

    If the battery charge is 25% or higher, continue with these steps.

    If the battery charge is 24% or lower, charge the battery for at least 30 minutes, and then continue with these steps.

    In Printer Settings, look for a firmware upgrade.

    If a firmware upgrade displays, tap Get Firmware Upgrade, and then follow the on-screen prompts to complete the update.

    If a firmware upgrade option does not display, the firmware is up-to-date

    You can refer this HP document for more assistance:- Click here
     
    I hope that helps.
    To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.
    Cheers.

    Sandytechy20 I am an HP Employee
    sandytechy20 on

Leave a comment